Bamboo Floor Cleaning Tips

Caring For Your Bamboo Floor

Once you have had your beautiful new bamboo floor installed you can insure that it looks great and sees many years of use and enjoyment by properly caring for it. Bamboo flooring is very tough and wears much better than most other types of hardwood floors. By protecting it from possible damage you will ensure its longevity. It will be a source of enjoyment for your family and guests for years to come. Below are a few tips to set you on the right path to provide the care that your bamboo floor requires for that long life that it deserves.

First and foremost, if you are using rugs on your bamboo floor make sure that they do not have a rubber backing. Rubber backed rugs can easily damage a wooden floor and bamboo is no exception. The rubber coating does not allow the floor to breathe properly and can lead to discoloration of your bamboo floor.

In this same vein, make sure that you place protective pads under any furniture legs that are in contact with your floor. Make sure to use pads that are backed with felt or thick fabric. This will prevent the pressure of the furniture from leading to an indentation in the bamboo flooring over time. Never allow heavy furniture to be dragged across your floor. This could lead to unsightly gouging and scrapes. Deep enough places would be much more expensive to repair than it would be worth so you really want to do what you can to prevent them.

Got The Prevention Down, Now How Do I Clean It?

One thing to do is to prevent any spills when possible. If a spill is allowed to sit for an extended period of time on your bamboo floor it could lead to discoloring. Make sure to get your spill up as quickly as possible when they happen. Usually you can easily remove simple spills by wiping up whatever was spilled and then lightly cleaning the area with a damp rag and a little vinegar water. Some manufacturers may recommend a certain type of cleaner better suited for their particular type of floor. If the manufacturer recommends a certain type of cleaner then you should try to use that brand if possible so that you do not potentially void your floor's warranty.

This goes for general cleaning as well. Make sure that you use a soft bristle broom to sweep your floor free of dust and dirt often so that it does not have a chance to accumulate and cause damage to your beautiful floor. A dust mop can make a very good tool to use due to the fact that it does not have bristles that may possible leave minute scratches that can lead to damage over time. Prevention can be a very powerful tool in this case. By placing a doormat at each entry, you can ensure that family and friends don't track dirt onto your beautiful floor that you will have to worry about cleaning up. A friend suggested that I keep an ancient Asian custom alive by having everyone remove their shoes as they enter. She said that it helped to encourage cultural awareness while saving her some cleaning time as well.

No matter how you look at it, your gorgeous new bamboo floor can last you for decades to come if it is cared for properly. By making sure to keep it clean you will extend it's life drastically. Enjoy!

toys cars kitchen furniture Do It Yourself

Pewter - Care and Cleaning Tips

Pewter is an alloy consisting of mostly tin and it is the fourth most precious metal. It also has very small amounts of antimony and copper which is added mainly for strength and/or color. The percentage of tin can vary from manufacturer to manufacturer, but most often you will find at the least 91% tin and the rest in antimony and copper.

European pewter has a minimum tin content of 92% although many of these manufacturers raise this to 95% and some even to 97% tin. The higher the tin content, the more silver the final color.

Pewter dates back to the Roman days and was only something the rich and wealthy could afford.

Despite contrary beliefs todays pewter is perfectly safe to eat and drink from. Modern pewter contains no lead as it once did. How can you tell if your pewter items have lead in them? This is a question that gets asked quite often. Read on to find out...

The result of lead in pewter is a grayish-black patina on the surface of the item. The amount of darkening and type of oxidation can vary depending on the type of environment the items are left in.

Most often, people will leave this patina on because it creates an antique look that many manufacturers try to simulate today. If you should try to remove it, the layers underneath are then exposed which will in time once again corrode and the patina comes back. In all actuality, the patina layer that forms on lead based pewter acts as a protective layer and should really not be removed.

Lead free pewter can also oxidize over time, but it takes much longer and the color is usually more grayish compared to the lead based pewter which is a darker gray or black in color.

General Pewter Care Tips:

- Pewter can be pitted or stained from certain foods such as citrus juice, types of salad dressings etc., so please remember to wash your items immediately after use.

- Do not place in the oven on a hot plate or near hot flames because pewter melts easier than other types of metals. Pewter melts at only 450 degrees.

- Always hand wash rather than placing in a dishwasher.

Pewter Cleaning Tips:

Unlike silver, pewter doesn't tarnish, so you will not need to clean it all that often.

There are generally three different types of finishes you will find in pewter items and each has a preferred method of cleaning.

Polished Pewter:

This type of finish is very shiny and smooth and only really needs to be cleaned a couple of times a year. The recommend method of cleaning this type of pewter is with a very soft cloth and some polish. You can try making your own paste of vinegar, salt and flour. Rub it in circular motions with a soft cloth gently to shine up your pewter. You can also find polishes at your local hardware store or auto parts store. Look for a polish that contains very fine grit if none at all.

For taking out fine scratches, we recommend using a polish called "Mothers". You can find this at your local hardware store. It has a very small amount of very fine grit in the polish and this must be applied with care. Just apply a little bit to the affected area and rub with a soft cloth in circular motions. You will notice that your cloth will turn black. This is normal, as it is actually taking off a very fine layer of pewter to reveal the new shiny layer underneath. Just keep turning the cloth so you are always using a clean part and your pewter will once again shine. If you should notice that the now cleaned area is shinier than the rest of the area, you may have to do the entire area to get an even effect.

Another type of polish that works well is Rottenstone. You can find this at some hardware stores or lumberyards.

Satin Pewter:

This type of pewter has a little bit more of a rougher appearance. It is not shiny, but has almost a grain type of finish. You can use warm water and a mild soap to clean this type of pewter.

Every couple of years you may want to buff out or brush this kind of pewter using very fine steel wool. You can find this in any local hardware store. Always remember to rub in the direction of the grain and do not press very hard. It will not take much to return it back to it's original appearance.

Oxidized Pewter:

Oxidized pewter usually has a darker finish and has an antique look to it. Just washing with warm water and a mild soap is all you really need to do with this type of pewter.

You should also note that pewter from earlier periods can oxidize easily because of the higher lead content.

toy plush Pet Dog Tool Store